Compare roofing estimates by lining up the written scope, specified materials, site protection, disposal, decking allowances and final inspection. The totals only become comparable once you understand which work each price includes and what can be charged separately.

Start with the same request
Give each roofer the same property information and explain what triggered the project. For a leak, note where the stain appeared, when it appeared and whether it followed a particular kind of rain. For a planned replacement, share the approximate age of the roof and any records of earlier repairs. Mention skylights, roof-mounted equipment, chimneys and additions. These details can affect access and the work required at the transitions. If one estimate follows an on-site assessment and another is based on exterior measurements, ask what assumptions each contractor used.
Make a side-by-side scope sheet
Create one column for each proposal and one row for each task. Use rows for removing existing material, protecting the site, checking the decking, installing underlayment, flashing penetrations, addressing ventilation, handling runoff and cleaning up. Under each line, write the actual wording or mark it as a question to resolve. Two proposals can use similar labels and describe different work. “New flashing,” for example, might refer only to exposed pipe boots in one scope and include the chimney and roof-to-wall transitions in another. Ask for the details in writing so you can compare the same features.
Know which parts of the roof are included
Ask the estimator to identify the slopes, porch roof, garage and any low-slope section included in the price. An older addition can have a different material from the main roof. If the project stops where those sections meet, ask how the connection will be weatherproofed and what remains in service. A simple labeled photograph or sketch can help. Pay special attention to valleys and upper downspouts that discharge onto a lower roof. If the estimate covers a single repair area, check how the contractor plans to tie the repaired area into the existing material.
Check the allowance for concealed damage
An inspection can identify some decking problems. Other conditions may become visible only after the covering is removed. Find out what amount of replacement decking is included, how extra material is priced and who approves the change. Ask whether the allowance is measured by the sheet, by the square foot or in some other way. Request photos of any additional work and agree on how the contractor will reach you if there is a decision to make. Consider what the total would look like if the project needed several extra sheets, and apply the same scenario to each proposal.
Read the material and ventilation details
Look for the manufacturer, product or system name and finish where applicable. Ask which components cover starter edges, ridges, valleys and penetrations. With shingles, confirm how the manufacturer’s instructions apply to the proposed roof. With metal, ask about panel type, attachment and the treatment of seams and transitions. Discuss ventilation if the roof covers a ventilated attic. Confirm what intake and exhaust features are included and what happens to existing vents. Product and workmanship terms vary. Request the actual written terms and ask who would handle a concern after the job.
Discuss the work around the property
Roof work takes up space beyond the roof itself. Confirm where vehicles, ladders, materials and the disposal container can be placed. Ask how the crew will protect entrances, garden beds, siding and paved areas. If the property shares access with another household or business, tell the estimator who needs notice. Clarify who moves fragile outdoor items and which doors should be available. On occupied buildings, ask how the crew plans to handle noise and access during the work. Agree on a contact for scheduling changes, weather delays and questions while the site is active.
Compare payment terms and changes
Read the payment milestones alongside the work milestones. Confirm when a deposit is due, how special-order materials are handled and when final payment is expected. Ask how a change order will describe the issue, price and expected effect on timing. If a quoted item is optional, check what accepting or declining it does to the rest of the scope. Record each quote’s expiration date and ask whether delivery or disposal fees are already included. Put any agreed changes in the scope you sign so the estimator, the crew and the property owner have the same record.
Plan the final review
Ask what the final walkthrough includes, who attends and how outstanding items are recorded. Useful handover details can include material names, photos of hidden repairs taken during work, cleanup expectations and contact information for follow-up. Ask how the crew checks the area for loose debris and nails and whether there is a step to review gutters and access paths after cleanup. Save the contract, change orders and photos together. They make it easier to explain the roof’s history if you later sell the property, schedule maintenance or report a leak.
Use a practical example
Suppose one proposal includes tear-off and one layer of replacement decking, while another lists removal but says decking is billed as needed. Ask the first estimator what happens if the allowance is exceeded. Ask the second for a unit price and a process for approving it. Then compare the same decking scenario across both. Apply the same check to chimney flashing, detached sections or unusual disposal. If the estimate assumes a condition that is unknown, write down how it will be confirmed. At the end of the comparison, you should be able to say what is included today and what could change once the roof is opened.
Prepare for a local estimate
Gather the ZIP code, roof type if known, recent ground-level photos and a short description of the work. If the scope has a specific deadline, share it at the first conversation. A local office can discuss whether an inspection is needed before pricing and how best to arrange access. For a property with several roof sections, mark the section of concern on a photo. Keep a copy of each written estimate and the questions you asked, so you can make the decision with the same information in front of you.

